KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
4
3.3 About the TP-102HD
Your Kramer TOOLS TP-102HD XGA / HD Line Transmitter / DA:
Receives a computer graphics
1
/ HD
2
signal and transmits it over two
CAT5 cables to appropriate receivers
3
Has a video bandwidth of 150MHz, with a transmission range of more
than 300 ft. (more than 100 meters)
Includes the Power Connect feature
Is 12VDC fed
3.4 Recommendations for Achieving the Best Performance
Achieving the best performance means:
Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
Avoiding interference from neighboring electrical appliances that may
adversely influence signal quality, and positioning your TP-102HD away
from moisture, excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit
4
.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 The terminology XGA is used throughout this manual, where this implies any RGBHV signal on an HD15 connector
having a resolution from VGA up to UXGA
2 The TP-102HD accepts high definition resolutions: 480p, 576p, 720p, 1080i, and 1080p
3 Note that the CAT5 connectors exclude audio
4 For example: model number AD2512C, part number 2535-000251
To Next Page
Loading...
