Kramer TP-102HD - Figure 4: TP-102 HD (Underside Panel); Table 1: TP-102 HD XGA; HD Line Transmitter; da Features; Table 2: TP-102 HD (Underside Panel) Features

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your TP-102HD XGA / HD Line Transmitter / DA
6
Table 1: TP-102HD XGA / HD Line Transmitter / DA Features
# Feature Function
1 12V DC +12V DC connector for powering the unit
2 LINE OUT 2 RJ-45 Connector Connects to
1
the LINE IN RJ-45 connector on
the (second) TP-120 XGA Line Receiver
2
3 LINE OUT 1 RJ-45 Connector Connects to
1
the LINE IN RJ-45 connector on
the (first) TP-120 XGA Line Receiver
2
4 XGA IN HD15F Connector Connect to the XGA source
5 ON LED Illuminates when receiving power
Figure 4 and Table 2 define the TP-102HD underside panel:
Figure 4: TP-102HD (Underside Panel)
Table 2: TP-102HD (Underside Panel) Features
# Feature Function
1 VS Switch Slide the switch to the left (to NORMAL) to retain the polarity; slide the
switch to the right
3
to change the VS polarity to NEGATIVE polarity
4
2 HS Switch Slide the switch to the left (to NORMAL) to retain the polarity; slide the
switch to the right
3
to change the HS polarity to NEGATIVE polarity
4
1 Using a UTP CAT5 cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 3 and Figure 6)
2 Refer to the separate user manual: PT-110, PT-120, TP-120, WP-110, which can be downloaded from the Internet at this
URL: http://www.kramerelectronics.com. Also, see the example illustrated in Figure 5
3 By default, both switches are set to the left
4 Downgoing syncs