Kramer TP-202

8
TP-202 - Connecting the TP-202
TP-202, decoded and converted at the UXGA OUT 1 and UXGA OUT 2
15-pin HD connectors to the UXGA acceptors simultaneously.
When chaining several units, we recommend using an STP cable
between the transmitter and the receiver and a skew-free cable for
connecting the TP-202 units. When using the TP-202 as a
standalone, we recommend using UTP cables.
Figure 3: Connecting the TP-202 UXGA Line Transceiver/DA
!