Need help?Do you have a question about the Kramer TP-205A and is the answer not in the manual?
General| Category | Transmitter |
|---|---|
| Power Supply | 5V DC |
| Power Consumption | 5W |
| Output Connectors | RJ-45 |
| Transmission Distance | 100m (over Cat6a) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 10% to 90%, RHL non-condensing |
Provides initial steps for setting up and using the TP-205A, including unpacking and cable recommendations.
Summarizes the basic setup and operation steps for the TP-205A in a concise chart format.
Details the TP-205A's high-performance transmitter capabilities, including resolution, loop capability, and transmission range.
Explains the Power Connect feature, allowing the TP-205A to power receivers via the CAT 5 cable.
Recommends using STP cable for electromagnetic interference compliance and discusses UTP cable considerations for long range.
Offers advice on using quality cables and positioning the unit to avoid interference for optimal performance.
Defines the underside features of the TP-205A, including HS and VS polarity switches and their functions.
Guides on connecting the TP-205A to sources, receivers via CAT 5, and RS-232 ports, including input selection.
Explains how to connect multiple TP-205A units to add further output signals to the system.
Details the UTP CAT 5 PINOUT for straight pin-to-pin cables with RJ-45 connectors for signal transmission.
Provides guidance on preparing an RS-232 cable and connecting it to the TP-205A for PC control.
To Next Page
