-427H2 Quick Start (P/N: 2900-300831QS REV 4)
P/N:
VP-427H2 Quick Start Guide
This guide helps you install and use your VP-427H2 for the first time.
Go to www.kramerav.com/downloads/VP-427H2 to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
VP-427H2 4K HDBT to HDMI Receiver/Scaler
Step 2: Get to know your VP-427H2
Connects to a USB memory stick for programming upgrade
Lights green when the unit is powered on
3 MENU Button Press to enter/exit the on-screen display (OSD) menu. Press together with the –
4 ENTER Button In OSD, press to choose the highlighted menu item. Press together with the
+/FREEZE button to reset to XGA
In OSD, press to move back through the list or to decrement the parameter value
6 +/FREEZE Button In OSD, press to move forward through the list or to increment the parameter value.
When not in OSD, press to freeze the display
7 HDBT IN RJ-45 Connector Connects to an HDBaseT transmitter
8 IR IN 3.5mm Mini Jack Connects to an IR sensor
Connects to an IR emitter
10 RS-232 9-pin D-sub Connector Connects to an acceptor to embed/de-
embed control commands in the HDBaseT data
stream
11 HDMI OUT Connector Connects to an HDMI acceptor
12 AUDIO OUT 3.5mm Mini Jack Connects to an unbalanced stereo audio acceptor
Connect to a PC via a LAN
+5V DC connector for powering the unit
To Next Page
Need help?
General
