General rules
Inspections:
The machine must be inspected according to the "Guidelines for Liquid
Spray Devices" at least once every 12 months by a qualified person, to
ensure that continued safe operation is guaranteed. The results of the
inspection are to be recorded in writing. This may be done in any form.
Accident prevention
The machine is designed for accidents to be impossible if used correctly.
The operator is to be notified of the risk of injury from hot machine parts and
the high pressure water jet. The "Guidelines for Liquid Spray Devices" must
be complied with. (See page 13 + 14)
Please pay attentions to the regulations of your waterworks company.
(Reflux valve with tube ventilation according to DIN 1988)
Check the oil level at the oil sight glass prior to each use.
(Ensure horizontal position !)
Oil change:
No oil change is required during the working life of the machine. We would
suggest though to change the oil after having used the high pressure
cleaner for a longer period of time to ensure its longevity. Should it be
necessary to change the oil the oil sight glass is to be opened over a
reservoir and the machine to be emptied. The oil is to be caught in the
reservoir and disposed of in the approved manner.
New oil: 0,25 l - Motor oil W 15/40
Guarantee
The guarantee period is 24 months accarding to VDMA. (except for wearing
parts.)
The guarantee is void if changes are made to the safety devices or if the
machine is used at excess temperatures or speeds. The guarantee is also
void if the machine is used with a voltage below the required rating, with less
than the required amount of water, with dirty water and external damage to
the pressure gauge, nozzle, pressure hose and spray device.
Vearing parts are: hoses, spraying devices, nozzles, pressure gauges,
packings, valves and gaskets.
Our operating instructions must be complied with.
15
To Next Page
Loading...
Need help?
General
