5
Description
Motor protection switch
The motor is protected from overload by a motor protection switch, which
automatically cuts out the motor in the event of overload.
However, should the switch trip frequently, the cause of the malfunction
should be located and rectified (see page 6).
Replacements and inspection work should only be performed ba
qualified persons when the machine is disconnected from
the power supply, i.e. pull the plug from the electrical
socket before such work is carried out.
Setting up
Location
Neither set up and operate the machine in rooms where there is a
risk of fire or explosion nor put it into puddles.
Do not use the machine under water.
CAUTION !
Never use liquid containing solvents such as paint thinners, patrol,
oil or similar liquid matter.
Pay attention to the instructions of the manufacturer of
the cleaning agents. The seals in the machine are not resistant
to solvents. The spray of solvents is inflammable, explosive and
poisonous.
CAUTION !
When running your high pressure cleaner with hot water of 60 °C
raised temperatures occur.
Do not touch the machine without safety gloves.
To Next Page
Loading...
Need help?
General
