8
Safety precautions
When using high pressure water for
cleaning, make sure that there is a clearly
noticeable recoil effect on the lance.
Therefore ensure a firm footing
(see chapter „Technical data“)
Apply the safety catch on the spray gun
after each use in order to prevent
unintentional spraying!
Persons operating the machine should wear the necessary protective clothing,
i.e. waterproof clothing, rubber boots, safety goggles, headwear etc. It is prohibited
to use the machine in close vicinity to people lacking suitable protective clothing
!
Do not spray against matter containing asbestos or other hazardous substances
!
Never spray liquids containing solvents like varnish solvents, petrol, oil or
similar liquid!
Due to the high pressure jet, damage may occur on the objects to be cleaned,
e.g. car tires; therefore, a minimum distance of 30 cm is to be kept.
Prior to putting the high pressure cleaners into operation, check its components
(HP hose, power supply cables, safety trigger gun) for any damage. Replace defect
or damaged components!
The high pressure cleaner is to be properly used. The user is required to adhere
to local requirements and to watch out for any persons in the danger zone!
To Next Page
Loading...
Need help?
General
