Kranzle K 1050 TS T Original Operating Manual

40 41
Putting into operation
Putting into operation
9. After insertion of the lance, release reta-
ining sleeve and make sure that the lance
is in a secure position.
8. First pull back the retaining sleeve of
the gun, then insert lance into the
plug coupling connection of the gun.
7. Tightly screw together high pressure
hose and trigger gun with safety catch.
6. Push on high pressure hose to trigger
gun with safety catch.
5. Unwind high pressure hose straight and
without nooses. Completely unwind
hose. (When using hose extensions take
care that the max. length of 20 m is not
exceeded!)
Prior to insertion, check plug coupling connection of lance for cleanliness
(sand, dirt ..) and use clear water to clean, if necessary.
Impurities may damage the sealing in the plug coupling.
GB
When carrying the high pressure cleaner, make sure to bear in mind the
weight of the machine, see technical data.
Neither set up or operate the K 1050 TS T in rooms where there is a risk of fire
or explosion nor put it into puddles. Do not use the machine under water.
If, none the less, the machine is operated in a hazardous area, the appli-
cable safety regulations are to be observed.
1. Use supplied screws to fasten the lower
cable retractor of the electric cable at
the place provided on the frame .
3. Move high pressure cleaner to the job
site. The Kränzle 1050 TS T is a movable
machine with sturdy trolleys ideally
suited for dicult terrain and stairs.
2. Position machine. Place crank on the
hexagon and use supplied washer and
screw to fasten.
4. Owing to its light weight and handy
size, the Kränzle 1050 TS T can be easily
carried by two persons.

Kranzle K 1050 TS T Specifications

General

Brand	Kranzle
Model	K 1050 TS T
Category	Pressure Washer
Language	English