Kranzle K 1050 TS T Original Operating Manual

46 47
Small repairs - do it yourself! Small repairs - do it yourself!
Having closed the trigger gun with safety
catch, the HP cleaner must shut down.
Failure to shut down may be caused by
leakage in the pump, the pressure switch,
the high pressure hose or the trigger gun
with safety catch.
In case of a leakage there is no guarantee
for possible consequential damages.
Problem:
After closing of the trigger gun with safety catch the machine keeps switching
on and o.
Possible cause no.1:
Leakage.
Proceeding:
Check connections from the HP cleaner to
the high pressure hose and from the hose
to the trigger gun and also the connecti-
on between lance and trigger gun for
tightness.
Switch o the cleaner. Shortly press the
trigger of the trigger gun with safety
catch to decrease the pressure. Unscrew
HP hose, trigger gun with safety catch
and lance and check the O-rings. If the
O-rings are
damaged they have to be replaced.
Proceeding:
Switch o the HP cleaner and pull plug from
socket. Stop water supply. Disassemble pipe
connection to hose drum. Unscrew pump
outlet .
There is no guarantee if the pump is damaged by
defective O-rings due to air induction or lack of water (cavitation).
Remove check body and check O-Ring for
soiling or damage.
Also check seal seat inside pump housing
for soiling or damage.
If sealing rings are defective replace
O-rings at once.
Problem:
After closing of the trigger gun with safety catch the machine keeps switching
on and o.
Possible cause no. 2:
The non-return valve is defective.
GB

Kranzle K 1050 TS T Specifications

General

Brand	Kranzle
Model	K 1050 TS T
Category	Pressure Washer
Language	English