4 . The machine can be connected to a
pressurised water line with cold or
60°C hot water
(see page 2).
Ensure that the water supply is
clean when sucking from external
sources. The hose cross section
must be at least 1/2” = 12.7 mm
(free passage). Filter 1
must always be clean.
Please make sure
that the filter 1 is clean be-
fore using your high pressure
cleaner.
CAUTION !
When running your high pressure cleaner with hot water of 60°
raised temperatures occur.
Do not touch the pump without safety gloves!
Water
5. Maximum induction height 2.5 m
see technical
data on page 2
Preparation for use
13
To Next Page
Loading...
Need help?
General
