5
Motor protection switch
The motor is protected from overload by a motor protection switch, which
automatically cuts out the motor in the event of overload. However should
the switch trip frequently, the cause of the malfunction should be located and
rectified (see page 6).
Description
Replacements and inspection work should only be performed by
qualified persons when the machine is disconnected from
the power supply, i.e. pull out the plug from the electri-
cal socket.
Setting up
Location
Neither set up and operate the machine in rooms where there is
a risk of fire or explosion nor put it into puddles. Do not use the
machine under water.
CAUTION !
Never use liquid containing solvents such as paint thinners,
petrol, oil or similar liquid matter. Pay attention to the in-
structions of the manufacturers of the cleaning agents.
The seals in the machine are not resistant to solvents. The spray
of solvents is inflammable, explosive and poisonous.
CAUTION !
When running your high pressure cleaner with hot water of 60° C
raised temperatures occur. Do not touch the machine
without safety gloves!
To Next Page
Loading...
Need help?
General
