To Next Page

To Previous Page

The pressure gauge shows a 10% higher pressure than the working pres

You only get a weak flow of water or no water at all!

Then straighten a

paper clip ...

and release the

injector with an

open-ended

spanner

Remove the injector

together with the

spring and return

valve.

and check that

it is clean.

Reconnect the hose,

and you are

ready to continue

your work!

and replace the

return valve.

The injector may be dirty and

you should

first

remove

the hose!

Now turn on the water

and you should get a

powerful stream of water

But if you only

get a weak flow

Clean the injector

thoroughly from both sides

Small repairs - Do it yourself!

Kranzle K125 User Manual

Questions and Answers: