Preparation for use
5. The machine must be connected to the water
line with cold water or up to 60° C warm water
(see page 2).
The hose cross section must be at least
3/4" = 16 mm (free passage). Filter 1 must
always be clean.
Please make sure that the lter is clean be-
fore using your high pressure cleaner.
CAUTION !
When running your high pressure cleaner with hot water of 60° C rai-
sed temperatures occur.
Do not touch the pump without safety gloves!
13
Undercarriage
Undercarriage
1
External suction
If water is to be sucked
from an external contai-
ner for the high pressure
cleaner, the connection
hose between the high
pressure pump and the
water tank must be scre-
wed off and the suction
hose must be connected
via a double nipple 3/4“ (Order no.: 46.004) to the con-
nection hose.
Make sure that the water is clean. Use the Kränzle suction hose with suction lter.
(Order no. 15.038 3)
Maximum suction height 2.5 m, maximum water temperature for direct suc-
tion: 60°C
(see technical data on page 2)
To Next Page
Loading...
