Kranzle quadro 11/140 TST - Total Stop System; Setting up; Location

With Total-Stop-System
The Kränzle quadro 9/170 TS, 11/140 TS und 12/150 TS - high
pressure cleaners are equipped with a Total-Stop-System.
If the main switch is switched on, the motor is started by means
of a pressure switch as soon as the gun is operated. The pump quickly reaches
the set operating pressure. When the gun is closed the motor is cut off immediate-
ly.
Replacements and inspection work should only be performed by qua-
lied persons when the machine is disconnected from the
power supply, i.e. the plug pulled out from the electrical
socket.
Setting up
Location
Neither set up and operate the machine in rooms where there is a risk
of re or explosion nor put it into puddles. Do not use the machine under
water. The device must not stand in the spray area of the high pressure jet.
CAUTION !
Never suck in liquid containing solvents such as paint thinners, petrol,
oil or similar liquid matter. Pay attention to the instructions of
the manufacturers of the cleaning agents. The seals in the
machine are not resistant to solvents! The spray of solvents is inam-
mable, explosive and poisonous.
CAUTION !
When running your high pressure cleaner with hot water of 60° C
raised temperatures occur. Do not touch the machine without
safety gloves!
7
Description