EasyManuals Logo

Kranzle therm 895 User Manual

Kranzle therm 895
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
Troubleshooting
Malfunctions without display
Malfunction Possible cause Action
Machine fails to start No electrical voltage at
machine
Master switch defective
Motor protection switch
actuated
Press switch (S3 or S5)
defective
Motor protection (K3) switch
defective
Check power supply and cables
Check and replace if necessary
Eliminate cause of overload
Check and replace if necessary
Check and replace if necessary
High pressure pump runs but
burner fails to ignite
Set water temperature
reached
Pre-ventilation time not yet
elapsed
Ignition switched off
Fuel tank empty, "OIL"
display at thermostat
Thermostat defective
Ignition switch defective
Float switch in fuel tank
defective
Fuel filter dirty
Fuel nozzle defective
Flow controller (S2) has
switched off
Contact of flow controller
defective or incorrectly set
Ignition contacts incorrectly
set or burned out
Increase target water
temperature, open gun with
machine on until water
temperature drops
Hold gun open for approx 5
seconds
Ignition switch "ON"
Refill fuel
Check and replace if necessary
Check and replace if necessary
Check and replace if necessary
Check and clean if necessary
Check and replace if necessary
Check water inflow; clean filter in
water tank
Readjust, check, replace
Readjust, check, replace
19

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kranzle therm 895 and is the answer not in the manual?

Kranzle therm 895 Specifications

General IconGeneral
BrandKranzle
Modeltherm 895
CategoryPressure Washer
LanguageEnglish

Related product manuals