Kraus KFF-1610 Installation Guide

Step 2: Securing the faucet assembly
Push the quick connector (I) firmly upward and attach it to the receiving block (a). Pull down moderately to ensure the
connection has been made.
Step 3: Securing the faucet assembly
Install the weight clip (H) at the point of the hose marking “weight here”. Insert the weight (G) onto the weight clip (H) by
sliding it down onto the weight clip (H).
Step 4: Connect waterlines to the main valve

Kraus KFF-1610 Specifications

General

Brand	Kraus
Model	KFF-1610
Category	Kitchen & Bath Fixtures
Language	English