Kraus KPF-1621 Installation Manual

Leakage under the
handle
Locking nut has come
loose
Remove the index
button at the top of
the handle. Loosen
set screw with a hex
wrench. Remove the
handle and unscrew
trim cap by hand.
Tighten locking nut
with an adjustable
wrench
Trouble - Shooting
If you have followed the instructions carefully and your faucet still does not
work properly, take the following corrective steps:
PROBLEM CAUSE ACTION
Water will not shut off
completely
Cartridge may be
defective
Remove the index
button at the top of
the handle. Loosen
set screw with a hex
wrench. Remove the
handle and unscrew
trim cap by hand.
Unscrew the locking
nut with an adjustable
wrench. Remove
ceramic disc cartridge.
Check for cracks
Leaking between spray
head and the hose
Spray head may be
loose or washer is not
seated correctly in the
hose connection
Tighten the spray head
by hand until snug.
Make sure the washer is
seated correctly

Kraus KPF-1621 Specifications

General

Brand	Kraus
Model	KPF-1621
Category	Plumbing Product
Language	English