Kraus Oletto KPF-2620 Installation Manual

Step 1A: Install base without deck & putty plate
J
Insert base (J) into sink or
countertop with “FR↑NT” facing
forward. Tighten screws on base
(J) with 4mm hex wrench (i2) until
base is secure on sink or
countertop.
Half Moon
Locking Nuts
i2
Installer Tip: Rotate the two
half-moon shaped locking nuts
inward before inserting base (J)
into sink or countertop.
Step 1B. Install base with deck & putty plate
C
J
Place a bead of clear silicone
sealant (not included) around the
edge of the putty plate (C). Secure
deck & putty plate (C) on sink or
countertop. Insert base (J) into
hole of deck & putty
plate (C) with “ FR↑NT” facing
forward. Tighten screws on base
(J) with 4mm hex wrench (i2) until
base is secure on deck & putty
plate (C).
i2
Installer Tip: Rotate the two
half-moon shaped locking nuts
inward before inserting base (J)
into deck plate (C).
1
2
6

Kraus Oletto KPF-2620 Specifications

General

Brand	Kraus
Model	Oletto KPF-2620
Category	Plumbing Product
Language	English