Kraus Oletto KPF-2620 Installation Manual

Step 4. Connect waterlines to main valve
E
Thread hot & cold waterlines (E)
onto angle stops. Tighten with
adjustable wrench until snug. Turn
on the angle stops and check for
leaks.
DO NOT TURN FAUCET ON
E
E
Hot
Cold
Installer Tip: Use two wrenches
when securing waterlines to
angle stops to prevent kinking,
as shown in picture
Step 5. Connect quick connect
D
Attach Quick Connect (H) with
black end onto spray hose (F)
until you hear a click. Attach
the other end onto the supply
hose (D) until you hear a click.
F
D
F
D
H
F
8

Kraus Oletto KPF-2620 Specifications

General

Brand	Kraus
Model	Oletto KPF-2620
Category	Plumbing Product
Language	English