Kraus Oletto KPF-2620CH User Manual

a
b
a
C
D
C
b
NOTE: “Front” on the base (a) must
face the front of the sink or
countertop. The two mounting plates
(b) on the base (a) must be loose and
movable during the installation of
the base (a).
Step 1a: Installing the easy install assembly (without escutcheon)
Step 1b: Installing the easy install assembly (with escutcheon)
Place the escutcheon (C) and the gasket
(D) on the sink or countertop. Insert the
base (a) into the escutcheon (C). Note:
If the surface is uneven, use silicone
under the gasket (D).
6
Shut off the water supply. Remove the
old faucet. Clean the mounting surface.
Check for the proper thickness of the
sink or countertop. Insert the base (a)
into the sink or countertop. If your
model does have a escutcheon, skip to
step 1 b.
NOTE: “Front” on the base (a) must
face the front of the sink or
countertop. The two mounting plates
(b) on the base (a) must be loose and
movable during the installation of
the base (a).

Kraus Oletto KPF-2620CH Specifications

General

Brand	Kraus
Model	Oletto KPF-2620CH
Category	Plumbing Product
Language	English