Troubleshooting
If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:
Leaking between spray head
and the hose
Washer may be missing or not seated
correctly in hose.
Make sure washer is present and seated
correctly in hose.
Care & Maintenance
* To keep the product clean & shining, follow the steps below:
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
* This installation manual is subject to change without further notice.
Water does not shut off
completely
Cartridge (5) may need to be
adjusted or replaced.
Remove index button. Loosen set screw
with 2.5mm hex wrench. Remove metal
handle. Remove cartridge cover by hand
only. Remove locking nut with an
adjustable wrench. Remove ceramic disc
cartridge. Check for cracks.
ACID
PROBLEM CAUSE ACTION
15
To Next Page
Loading...
Need help?
General
