ATTENTION
!
The tracks can be taken apart for storage.
Reassemble them in number order, as indicated by the labels.
ATTENTION
!
The guide strips are slightly shorter than an
individual track section, overlap the outer track-section joints, and fall
short of the ends of the complete track assembly.
Assembly
With the track fully assembled and upside
down, apply the indexing labels (E) so they
read in sequence from left to right.
Slide the starting block (F) into the T-slots in
the end track (A).
Guide-strip overlap
Outer track-section joint
1
2
3
4
F
A
ENGLISH
To Next Page
Loading...
Need help?
General
