Kremlin-Rexson PMP 150 - Page 40

KREMLIN REXSON - 1 - N° : 578.028.120-UK-1309
1. DESCRIPTION
Pneumatic dual diaphragm pump.
z Low maintenance and ease of use.
z No fluid packing.
z Easy flu shing.
PMP 150 standard recommended for :
z supplying one or several spray guns,
z the f ollowing materials : paints and ink s, epoxy, adhesives, water-based.
PMP 150 E recommended for :
z water-based and charged materials (without solvent).
2. TECHNICAL FEATURES
Fluid pressure ratio
1/1
1/1
Capacity
50 cm3
1.76 oz
Delivery per cycle
100 cm3
3.52 oz
Number of cycles
10
38 per gal
Fluid delivery per cycle
19 l/mn
5 US gal
Air pressure operating range
6 bar
87 psi
Maximum discharge pressure
6 bar
87 psi
Weighted sound pressure (LAeq)
< 70 dBa
< 70 dBa
Maximum operating temperature
50°C
122°F
Air supply hose
(minimum ID for a 5 m / 16.5 ft length)
 10 mm
3/8 "
Weight
5Kg
11 Lbs
Wetted parts in contact with the materials : PMP 150 standard PMP 150 E
Diaphragms
PTFE Polyurethan
Valves
Stainless steel Polyurethan
Collectors and flanges
Polypropylen
Seat seals
PTFE
Fluid regulator with integrated air pilot
Stainless steel -
 FITTINGS
Air inlet : F 3/8 BSP (air valve)
Fluid inlet : M 18 x 125 or suction rod
Fluid outlet : M 3/8 NPS