KRHÜNER 50955 - Assembly and Initial Setup

ASSEMBLY
Open the package and take out the air cooler, wheels and wrench. Place the air cooler
on a at place.
a) Installaon of the wheels:
Place 4 wheels to the holes located at the base of the air cooler. Two wheels with brakes
should be installed at the back holes and the other two wheels to the front holes. Insert
the wheels ghtly to the body of the cooler (Fig. 1).
b) Water tank relling:
Turn the water tank lock to horizontal posion (Fig. 2). Take out the water tank and add
clean tap water to the large secon of the tank. Be sure that the water level in the tank
does not exceed the level“MAX”which can be seen at the back of the tank (Figs.3-4).
BEFORE USING
Insert the plug to the electrical outlet. Press the “On-O” buon to switch the unit on.
The LED indicator automacally shows the room temperature and shis the fan to stand
by posion. The funcon of the unit can be controlled using the control panel or using
the remote control.