KRHÜNER 50955 - Advanced Airflow and Timer Settings; Special Modes: Cool, Warm, Ion

3. Wind: Press to choose the type of air. The indicator light will display the selected
type of wind:
a) Normal. A connuous wind blow that can be adjusted to low, medium or high
speed.
b) Natural. It provides a so and comfortable environment with a selecon of low,
medium or high speed.
c) Sleep. It operates at natural fan speed and slowly lowers the speed before turn-
ing it o altogether. At high speed, the cooler works for 6 seconds and then shis
to medium speed, then it works at this speed for 6 seconds and the turns to low
speed. The cooler will turn o aer 6 seconds or unl the end of the preset me.
4. Timer: Press to set the working hours of the fan. You can choose between 1-12
hours. The indicator light will show the selected me and will operate unl the
preset me passes. Connuously press the buon to your desired running me. To
cancel the mer, simply press the buon unl the indicator shows “00”.
5. Swing: Press to change the wind direcon. The swing icon will appear on the
screen when the funcon is acvated. Press the buon again to stop the oscilla-
on. The vercal direcon of the air ow can be adjusted manually by direcng the
outlet louvers up and down.
6. Cool: Press this key to acve the air cooler funcon. Water pump will take the
water from the tank and pour it onto the cooling pad. The cooling pad absorbs the
heat of the water and the evaporated air is blown out through the fan. The cool
breeze drops the temperature and creates a relaxing cooling eect. Cauon: If the
water level is low or there is no water in the tank, do not acvate the “Cooler ”
funcon. Check rst the water level and add clean water if needed, also to replace
the stale water. It is recommended to replace the water in the tank at least once in
a week.
7. Warm: Press this key to acve the heang funcon. The PTC heang element
inside the cooler can warm the air in 3 seconds. Press one me for low heang
(1000W) or two mes for high heang (2000W). Press againt to cancel the heang
funcon. In order to protect the heang element, aer using the heang funcon,
if you press the OFF buon, the device will connue working for 30 seconds to cool
down.
8. Ion: Press to acvate the ionizer funcon. The indicator light will signify that the
funcon is on as the negave ions releases. Ions aract harmful parcles in the air
such as dust, pollen, mold, spores etc. which causes them to drop out of air, thus
making the air.