Updated June 2016 Page 1 © Krick Modelltechnik Knittlingen
Building specifications – Gaff Cutter Yacht
ANTARES
Order No. 20370
Congratulations on your purchase of the
“ANTARES” cutter yacht. This model is essen-
tially for advanced beginners who have already
built several models and who enjoy the hobby
of active boat model building, but it is also
great fun to build and run even for experienced
boat model builders.
To build the model, you will need the following
adhesives, fillers and colours:
- Super glue, Roket Hot Thin (order No.
44050)
- Super glue, Roket Rapid Medium (order No.
44051)
- Two-component adhesive 5 min epoxy 100g
(Order No. 80479)
To Next Page
Loading...
Need help?
General
