Kröber O2 - Kröber O2 Vers. 4.0
Fig. 18. Oxygen outlet connector
4 Connect the 15m-oxygen safety tubing
to the connector.
Fig. 19. Humidifier Max.-mark
5 Fill the humidifier up to the top MAX.-
mark (1).
ATTENTION! Sterility!
To ensure an adequate level of
sterility, use always boiled water!
Fig. 20. Humidifier assembly
6 Screw the angle adapter (1) to the
humidifier.
7 Plug the 15 m safety hose for oxygen
(extension hose) onto the angle
adapter (2).
8 Push the 0.33-m safety hose for
oxygen onto the outlet connector of the
humidifier (3).
To Next Page
Loading...
