Krober O2 - Page 80

Kröber O2 - Kröber O2 Vers. 4.0
Taking into service
80 EN
Fig. 23: Connection to the nasal cannula
12 Completely assembled system
a. Oxygen concentrator
b. Adapter
c. 15 m O2 safety hose
d. Humidifier
e. 0.33 m safety hose
f. Firesafe valve
g. 2 m oxygen nasal cannula
h. Mains connection
WARNING! Danger of tripping over!
On the back of the Kröber O2 you will find a winding device for the mains lead.
This should be used when the unit is out of use, to avoid any danger of tripping
over.
Oxygen safety tubes and nasal cannulas should always be laid in such a way
that they do not represent any tripping or strangulation traps for third parties!