To Next PageTo Next Page
Need help?Do you have a question about the Kroeplin F210 and is the answer not in the manual?
General| Brand | Kroeplin |
|---|---|
| Model | F210 |
| Category | Test Equipment |
| Language | English |
Explains various display indicators and their meanings.
Function for comparative measurements.
Procedure to find and save the minimum measured value.
Procedure to find and save the maximum measured value.
Function to freeze the current measured value.
Utilizes LEDs for tolerance limit indication.
How to enter the configuration menu.
Red and green LEDs for out-of-tolerance and in-tolerance status.
Covers switching the device on and off.
Transitioning from ABS to REL measurement mode.
Transitioning from REL to ABS measurement mode.
How to choose MIN, MAX, HOLD, and TOL modes.
Entering and moving through the setup options.
Procedure for setting the zero reference.
Setting the lower tolerance limit.
Configuring measurement units and display resolution.
Detailed steps for setting the zero point.
Setting upper and lower limits in absolute mode.
Setting upper and lower limits in relative mode.
