Kroeplin F415 - Functions and programs; Basic functions

18
Operating Keys:
No. Key Functionen Remarks
10 MODE - Select measuring programs
- Zero setting adjustment (+)
- Adjustment of tolerance limits (+)
- Choose MM / INCH
- Choose scale interval
- MIN / MAX / HOLD / TOL
- Only in SETUP – Menu
(see detailed specification
“3. Functions and Programs”)
11 SET - Start SETUP – Menu
- Start OFFSET
- Start tolerance limit adjustment
- Start selection of the measuring unit
- Start selection of the scale interval
- Saving of the settings
- (see detailed specification
“4. Handling of Functions and
Programs”)
12 DATA - Data transfer
- Zero setting adjustment (-)
- Adjustment of tolerance limits (-)
- Key lock ON / OFF
- (see detailed specification
“4. Handling of Functions and
Programs”)
13 ON <0> - Switch on
- Switch off
- Changing between absolute and rela-
tive measurement (0-Preset)
- (see detailed specification
“3. Functions and Programs”)
- Display only in REL
3. Functions and programs
Function Basic Action Result Remarks
Basic functions
Switching on
The last mode will be shown
Switching off
Note: The gauge switchs off auto-
matically if it is not used for longer
than 1 min.
Switch
ABS Æ REL
Example: at 30mm
Switch
REL Æ ABS
Example: at 30mm
Switch can be done in Mode MIN /
MAX / HOLD and TOL