Kroeplin G P3 Series User Manual

32
MIN-Program
Important:
The measuring axis is in
centric position to the
bore via 3-point-
support!
Determination of the minimum measuring value via pivoting
the gage (optimal measurement).
Measured value Measured value Measured value
too high correct too high
HOLD-Program
Important:
Selected measuring
position.
Hold gage steady
around 2s!
Finding and saving the measured value where a pivoting of the
gauge is not possible.
Program: MIN / HOLD

Kroeplin G P3 Series Specifications

General

Brand	Kroeplin
Model	G P3 Series
Category	Measuring Instruments
Language	English