9
T-Product · GIK, GIK..B · 2004 November
Installation
WARNING: Improper installation, adjustment, modifi-
cation, operation or maintenance could lead to injury or
damage. All adjustments must be made by a qualified
technician.
Wiring must comply with local codes and National
Electrical Codes. To prevent the posibility of property
damage, turn off electrical power, depressurize instal-
lation, vent fluid to safe area before servicing.
• Remove thread protectors
• Observe direction of flow: arrow on housing
• Spring dome must point vertically downwards
• The housing must have clearance of ¾" from any
vertical surface. Allow access to spring adjustment
at top of housing
• Use suitable sealant, apply sparingly, only to outer
threads.
• Check for gas leaks. Apply pressure to regulator (do
not exceed name plate rating) – measured at test
point.
• Soap pipe joints and check for leaks.
To Next Page
Loading...
Need help?
General
