Kromschroder BCM 400 B2 Series User Manual

DK S N P GR
➔ www.docuthek.com
D GB F NL I E
TR CZ PL RUS H
© 2019 Elster GmbH · Edition 12.19
Safety
Please read and keep in a safe place
Please read through these instructions
carefully before installing or operating. Following the
installation, pass the instructions on to the opera-
tor. This unit must be installed and commissioned
in accordance with the regulations and standards
in force. These instructions can also be found at
www.docuthek.com.
Explanation of symbols
• ,  ,  ,  ... = Action
▷ = Instruction
Liability
We will not be held liable for damage resulting from
non-observance of the instructions and non-com-
pliant use.
Safety instructions
Information that is relevant for safety is indicated in
the instructions as follows:
DANGER
Indicates potentially fatal situations.
WARNING
Indicates possible danger to life and limb.
CAUTION
Indicates possible material damage.
All interventions may only be carried out by qualified
gas technicians. Electrical interventions may only be
carried out by qualified electricians.
Conversion, spare parts
All technical changes are prohibited. Only use OEM
spare parts.
Changes to edition 04.9
The following chapters have been changed:
– Commissioning
– Assistance in the event of malfunction
– Certification
Contents
Operating instructions
D
GB
F
NL
I
E
GB-1
05597
Translation from the German
Bus module BCM 400..B/B
PROFINET/EtherNet/IP for
BCU4xx
Bus module BCM 400..B/B
PROFINET/EtherNet/IP for BCU4xx .......
Contents ..............................
Safety.................................
Checking the usage .....................
Installation ............................
Replacement...........................
Wiring ................................
Commissioning.........................
BCM..B2 (PROFINET) ....................3
BCM..B3 (EtherNet/IP) ....................3
Fieldbus configuration (parameter A080) ......4
Assistance in the event of malfunction .....4
Technical data .........................5
Logistics ..............................6
Certification ...........................6
Contact ...............................6
Safety
Contents

Kromschroder BCM 400 B2 Series Specifications

General

Brand	Kromschroder
Model	BCM 400 B2 Series
Category	Control Unit
Language	English

Summary

Safety

Explanation of symbols

Defines the meaning of symbols used in the document for clear understanding.

Liability

States the manufacturer's disclaimer regarding damage from incorrect usage or non-compliance.

Safety instructions

Provides guidance on safe installation and operation, highlighting potential hazards.

Conversion, spare parts

Specifies that unauthorized technical changes are prohibited and only OEM parts should be used.

Changes to edition 04.19

Lists the chapters that were modified in the April 2019 edition of the manual.

Checking the usage

Type code

Details the coding system for BCM bus modules, including series and communication protocols.

Part designations

Identifies and describes the physical components and connectors of the bus module.

Installation

Replacement

Wiring

Commissioning

BCM..B2 (PROFINET)

Instructions for commissioning the PROFINET version of the bus module, including GSD file usage.

BCM..B3 (EtherNet/IP)

Instructions for commissioning the EtherNet/IP version, including EDS file usage.

Fieldbus configuration (parameter A080)

Parameter A080 = 0: Fieldbus communication Off

Explains how to disable fieldbus communication, allowing Ethernet access via BCSoft.

Parameter A080 = 1: Fieldbus communication with address check

Details configuration for fieldbus with address verification, including device naming and code switches.

Parameter A080 = 2: Fieldbus communication without address check

Describes configuration for fieldbus without address verification, allowing DHCP or engineering tool IP allocation.

Assistance in the event of malfunction

Faults, Cause, Remedy

A structured table format to diagnose and resolve common faults and error messages.

Technical data

Ambient conditions

Specifies operating and storage temperature ranges, and environmental considerations.

Mechanical data

Provides dimensions and weight of the bus module.

Electrical data

Details power consumption and power loss for the device.

Designed lifetime

Indicates the expected service life of the unit under specified operating conditions.

Logistics

Transport

Guidelines for protecting the unit during transport and reporting damage.

Storage

Recommendations for proper storage conditions and time limits to maintain service life.

Packaging

Instructions for the disposal of packaging materials according to local regulations.

Disposal

Guidance on disposing of components separately in accordance with local regulations.

Certification

Contact