Need help?Do you have a question about the Krone Bellima F 130 and is the answer not in the manual?
General| Brand | Krone |
|---|---|
| Model | Bellima F 130 |
| Category | Farm Equipment |
| Language | English |
Confirms the document's validity for specific machine types and state of information.
Explains document structure, references, icons, and terminology for effective use.
Defines the machine's intended purpose and describes improper uses and associated risks.
Provides fundamental safety guidelines for machine operation, maintenance, and personnel.
Outlines essential safety procedures for machine shutdown, securing, and testing.
Details the purpose and importance of safety labels for hazard warnings.
Illustrates and labels the main components of the round baler.
Describes the machine's capability for storing and applying twine for baling.
Explains the process and components involved in wrapping bales with net.
Lists required oils, greases, and tyre specifications for the machine.
Instructions for attaching pick-up guide wheels and the bale ejector.
Guidance on adjusting the universal shaft length and mounting its protective cap.
Details the procedure for checking and adjusting tyre pressure before initial operation.
Provides instructions for correctly connecting the machine to the tractor.
Describes how to safely connect hydraulic hoses to the machine and tractor.
Instructions for connecting the electronic baling pressure indicator and road lighting.
Covers pre-baling checks and guidelines for even bale chamber filling.
Details initiating tying, the tying cycle, and bale ejection.
Instructions for setting pick-up position and holding-down clamp.
Covers twine tying setup, net roll insertion, and net wrapping.
Guides on how to safely clear crop blockages from the machine.
Steps to ensure the machine is ready for safe road transportation.
Instructions for safely parking the machine after use.
Covers adjusting guide wheels, relief springs, and twine limiters.
Details settings for twine layers, twine brake, and hydraulic tying start.
Explains how to set baling pressure and adjust sensors.
Provides a comprehensive schedule for regular maintenance tasks.
Details lubrication points, types of lubricants, and intervals.
Lists critical torque values for various screws and nuts.
Instructions for setting, oiling, and replacing drive chains.
Covers adjustments for friction wheels, drive wheels, and spring rails.
Guidance on checking hydraulic hoses and the tying start unit.
Troubleshooting for problems related to the pick-up and crop intake.
Addresses disturbances in net wrapping and twine tying operations.
Troubleshooting for problems during or after the baling process.
Instructions for adjusting the mechanical baling pressure indicator.
To Next Page