Name: Krone Bellima F 125
Brand: Krone
Rating: 4 (1 reviews)

To Next Page

Original Operating Instructions

Document no.: 150000147_06_en

Round Baler

Bellima F 125

From machine no.: 995323

Table of Contents3
Information on this Document6
Validity6
Re-Ordering6
Applicable Documents6
Target Group of this Document6
How to Use this Document6
Directories and References6
Figures7
Conversion Table9
Safety11
Intended Use11
Reasonably Foreseeable Misuse11
Service Life of the Machine12
Basic Safety Instructions12
Importance of Operating Instructions12
Personnel Qualification of the Operating Personnel12
Personnel Qualification of the Technicians13
Children in Danger13
Connecting the Machine13
Structural Modifications on the Machine13
Additional Equipment and Spare Parts13
Jobs on the Machine14
Operational Safety: Technically Sound Condition14
Danger Zones15
Ensuring Functionality of Safety Devices17
Personal Protective Equipment17
Safety Markings on the Machine17
Road Safety18
Parking the Machine Safely19
Consumables19
Dangers Arising from Environment19
Sources of Danger on the Machine20
Dangers in Connection with Certain Activities: Working on the Machine21
Dangers in Connection with Certain Activities: Working on Wheels and Tyres22
Behaviour in Dangerous Situations and in Case of Accidents23
Safety Routines23
Shutting down and Safeguarding the Machine23
Securing Raised Machine and Machine Parts against Lowering23
Carrying out Oil Level Check and Oil and Filter Element Changes Safely24
Running Actuator Test24
Safety Labels on the Machine25
Safety Equipment29
Data Memory31
Machine Description32
Machine Overview32
Overload Protections on the Machine33
Identification Plate33
Description of the Twine Tying Functionality33
Description of the Net Wrapping Functionality34
Technical Data36
Consumables37
Oils37
Lubricating Greases37
Initial Operation38
Scope of Delivery38
Mounting Guide Wheels on Pick-Up39
Adjusting the Drawbar Height41
Universal Shaft42
Adjusting the Length of the Universal Shaft42
Mounting Protective Cap of Universal Shaft43
Mounting Hose and Cable Support43
Preparing Starter Roll of Twine Tying44
Preparing the Brake Disc of the Wrapping Material Brake44
Checking/Adapting the Tyre Pressure44
Start-Up46
Connecting Machine to Tractor46
Mounting Safety Chain47
Connecting Hydraulic Hoses48
Mounting the Universal Shaft on the Tractor49
Connecting the Road Lighting50
Preparing the Operating Cables for Mechanical Machine Functions51
Mechanical Tying Start Unit51
Hydraulic Switching Valve for Pick-Up and Tailgate51
Operation52
Preparation before Baling52
Filling the Bale Chamber52
Completion of the Baling Process, Start of Tying, and Ejection of the Round Bale54
Initiating the Tying Cycle54
Locking/Releasing the Cutting Unit of the Net Wrapping55
Using the Bale Counter56
Operating Support Jack56
Fitting Wheel Chocks57
Pick-Up58
Bringing the Pick-Up to Transport/Working Position58
Adjusting the Pick-Up Working Height58
Holding-Down Clamp59
Setting the Holding-Down Clamp59
Dismounting/Mounting the Holding-Down Clamp60
Twine Tying60
Setting the Twine in Place60
Dismounting/Mounting the Start Device of the Twine Tying System64
Net Wrapping64
Inserting the Net Roll64
Insert Net66
Actuating the Hydraulic Switching Valve67
Opens/Closes the Tailgate67
Using the Stop Cock of the Tailgate67
Removing Crop Blockages68
Crop Blockage at the Right-Hand and Left-Hand End of the Pick-Up68
Crop Blockage in the Pick-Up68
Crop Blockage between Pick-Up and Bale Chamber69
Driving and Transport70
Preparing the Machine for Road Travel70
Checking Road Travel Lighting71
Parking the Machine71
Settings72
Adjusting the Guide Wheels of the Pick-Up72
Adjusting the Number of Twine Layers73
Adjusting the Twine Limiter74
Setting the Number of Net Layers74
Setting the Twine Brake75
Setting the Driver of the Twine Tying76
Setting the Wrapping Material Brake76
Setting the Hydraulic Tying Start Unit for Net and Twine Tying77
Maintenance79
Maintenance Table79
Maintenance - Prior to the Beginning of the Season79
Maintenance - Once after 10 Hours80
Maintenance - Once after 50 Hours80
Maintenance - Every 10 Hours, at Least Daily80
Maintenance - Every 50 Hours80
Maintenance - Every 500 Hours80
Maintenance - Every 6 Years80
Lubrication Chart81
Lubricating the Universal Shaft86
Tightening Torques86
Checking/Maintaining Tyres89
Servicing the Main Gearbox90
Bleed the Friction Clutch on the Universal Shaft91
Checking and Adjusting the Twine Tying Unit92
Cleaning the Twine Guide Slide and Oiling the Drive Chains92
Checking and Adjusting the Starter Roll and the Pressure Rolls93
Cleaning the Cutting Unit93
Checking and Adjusting the Net Wrapping Device94
Adjusting the Friction Wheel and Drive Wheel94
Setting the Spring Rail94
Adjusting the Cutting Unit95
Checking and Setting the Hydraulic Tying Start Unit96
Checking Hydraulic Hoses96
Checking and Setting the Lock Hook Blocker at the Tailgate97
Set and Oil the Drive Chains98
Drive Chain of the Pick-Up98
Drive Chain of the Bale Formation Conveyor99
Drive Chain of the Rollers99
Check the Distance of the Roller to the Bale Formation Conveyor Chain, Set if Applicable100
Cleaning the Machine101
Clean the Bushing and the Drawbar Eye102
Hydraulic Diagram102
Disturbance, Cause and Remedy104
Disturbances at the Pick-Up or During Picking up of Crops104
Disturbances at the Tying Unit or During the Tying Cycle105
Disturbances at the Twine Tying Unit106
Disturbances During or after the Baling Process107
Setting the Twine Guide at the Starter Roll109
Setting the Cutting Unit of the Twine Tying Unit109
Checking and Adjusting the Starter Roll and the Pressure Rolls110
Changing O-Ring Seal on the Twine Coil Starting Device110
Setting the Tailgate Lock111
Setting the Mechanical Baling Pressure Indicator112
Storage114
Waste Disposal116
Index117
Declaration of Conformity123

Brand	Krone
Model	Bellima F 125
Category	Farm Equipment
Language	English

Krone Bellima F 125 User Manual

Table of Contents

Questions and Answers:

Krone Bellima F 125 Specifications

Related product manuals