Krone EasyCut 280 - Hydraulics; Special Safety Instructions; Connecting the Hydraulic Lines

Start-up
31
Pos: 17.6 /BA/Erstinbetriebnahme/EasyCut/Ankuppeln Bild EC 280/320 @ 9\mod_1220537315742_78.docx @ 126927 @ @ 1
EC-159-1
1
2
3
4
1
Figure
7
Pos: 17.7 /BA/Erstinbetriebnahme/EasyCut/Ankuppeln Text EC 280/320 (280/320CV-Q) @ 9\mod_1220537421383_78.docx @ 126948 @ @ 1
• Attach the machine onto the lower suspension arm (1) of the tractor.
• Hook the top link (2) into the upper hole of the 3-point support.
Pos: 17.8 /Überschriften/Überschriften 2/F-J/HHydraulik @ 0\mod_1199776034950_78.docx @ 34205 @ 2 @ 1
6.2 Hydraulics
Pos: 17.9 /Überschriften/Überschriften 3/P-T/SSpezielle Sicherheitshinweise @ 0\mod_1197301069931_78.docx @ 17662 @ 3 @ 1
6.2.1 Special Safety Instructions
Pos: 17.10 /BA/Sicherheit/Hydraulik/Warnung - Anschluss der Hydraulikleitungen @ 0\mod_1199776548685_78.docx @ 34225 @ @ 1
Warning ! - Connection of the hydraulic line
Effect: severe injuries due to penetration of hydraulic oil under the skin.
• When connecting the hydraulic hoses to the hydraulic system of the tractor, the system
must be relieved of the pressure on either side.
• Due to the risk of injury when searching for leaks, always use suitable tools and wear
protective goggles.
• Seek medical help immediately should injuries occur! Danger of infection.
• Depressurise prior to uncoupling the hydraulic hoses and working on the hydraulic system!
• Check the hydraulic hose lines at regular intervals and replace them if damaged or worn!
The replacement hoses must fulfil the technical requirements set by the equipment
manufacturer.
Pos: 17.11 /Überschriften/Überschriften 3/F-J/HHydraulikleitungen anschließen @ 0\mod_1199777037794_78.docx @ 34244 @ 3 @ 1
6.2.2 Connecting the hydraulic lines
Pos: 17.12 /BA/Sicherheit/Hydraulik/WARNUNG - Vertauschen der Hydraulikkleitungen, wenn EW @ 9\mod_1220871857985_78.docx @ 128182 @ @ 1
Warning - If the hydraulic hoses are interchanged when connecting them to the
hydraulic system of the tractor, the functions will be interchanged as well.
Effect: Injuries, serious damage to the machine
• Identify the hydraulic connections.
• Always ensure correct connection between the machine and the tractor.
• When engaging the hydraulic hose, the hydraulic control unit must be in float position or in
"lowering" position.
Pos: 17.13 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1