Krone Swadro TC 1000 - User Manual

To Next Page

Original operating instructions

Rotary Rake

Swadro TC 1000

(from serial no.: 994 352)

Order no.: 150 000 631 04 us

20.06.2018

Main Page

1 Table of Contents3
2 To this Document6
- Validity6
- Re-Ordering6
- Further Applicable Documents6
- Target Group of this Document6
- How to Use this Document6
3 Safety12
- Intended Use12
- Service Life of the Machine12
- Basic Safety Instructions12
- Safety Routines24
- Safety Stickers on the Machine26
- Safety Equipment31
4 Machine Description34
- Machine Overview34
- Identification Plate35
- Information Required for Questions and Orders35
5 Technical Data36
- Consumables38
- Tyres38
6 Control and Display Elements39
7 Commissioning41
- First Installation41
- Preparations on Tractor42
  - Adjusting the Lower Suspension Arms42
- Connecting the Lower Link43
- Height of Tractor Lower Suspension Arms43
- PTO Shaft44
  - Length Adjustment44
- Regulating Direction of Travel45
- Checking the Locking of the Transport Position46
- Checking / Setting Distance between Tine Arm and Outrigger Arm47
- Basic Setting of Rotor Inclination48
8 Start-Up49
- Connect the Machine to the Tractor50
- Connecting the Hydraulic Lines51
- Lighting Connection52
- Connecting the Operation53
- Install the PTO Shaft55
- Using the Safety Chain56
- Swivelling Parking Support into Transport Position58
9 Driving and Transport59
- Preparations for Road Travel60
- Driving on Slopes61
- Switching off the Machine62
10 Operation63
- Removing the Tine Protections from the Tine Tips63
- Lowering Outrigger Arms into Working Position64
  - In Case of Electro-Hydraulic Single-Rotor Lifting Mechanism Design64
- Swivel Tine Arms to Working Position65
- Move the Hoop Guards to the Working Position67
- Setting the Working Height67
- Adjusting the Working Width69
- Move the Hoop Guards to Transport Position70
- Swivelling Tine Arms into Transport Position71
- Raising Outrigger Arms into Transport Position72
  - In Case of Electro-Hydraulic Single-Rotor Lifting Mechanism Design73
- Protecting the Tine Tips (Transport Position and Rotary Rake Switched Off)74
- Selecing Rotor Operation75
  - In Case of Electro-Hydraulic Single-Rotor Lifting Mechanism Design75
- Travelling Speed und Drive Speed76
- Swathing76
11 Settings77
- To Adjust the Rotor Running Gear78
- Adjustable Throttles80
- Calibrating the Sensor - with Electrical Rotor Height Adjustment Design81
- Setting the Spring Relief82
12 Maintenance83
- Spare Parts83
- Maintenance Table84
- Tightening Torques85
- Tyres88
  - Checking and Maintaining Tyres88
  - Torque of Wheels on the Running Gear89
- Replacing the Tine Arms (in Case of Repair)90
- Replacing the Tines (in Case of Repairs)92
  - Testing the Screws on the Tines93
13 Maintenance - Lubrication94
- Lubrication Points on the Universal Shafts94
- Lubrication Points on the Machine96
14 Maintenance - Hydraulic System101
- Hydraulic Circuit Diagram101
15 Maintenance - Gearbox102
- Main Gearbox103
16 Special Equipment104
- Tine Loss Safeguard104
- Chain for Height Restriction of Suspension Arms105
17 Placing in Storage106
- At the End of the Harvest Season106
- Before the Start of the New Season107
18 Malfunctions - Causes and Remedies108
19 Disposal of the Machine110
20 Appendix111
- Hydraulic Circuit Diagram111
- Circuit Diagram114
21 Index114

Need help?

Do you have a question about the Krone Swadro TC 1000 and is the answer not in the manual?

Krone Swadro TC 1000 Specifications

General

Brand	Krone
Model	Swadro TC 1000
Category	Farm Equipment
Language	English

Related product manuals

Krone Swadro TS 620 Twin

Krone Swadro TC 1000 - User Manual

Table of Contents

Krone Swadro TC 1000 Specifications

Related product manuals