Owner’s manual
30
EN
EPG (ELECTRONIC PROGRAM GUIDE)
1. Press the EPG button on the remote control to enter Electronic Program Guide.
2. Use direction buttons on the remote control to navigate the menu.
3. Press the Timer button to enter the PVR schedule menu.
TROUBLESHOOTING
Problem Possible reason Possible solution
LED indicator is not on Power adapter is
disconnected
Check the connection of
power adapter
No signal Antenna is disconnected Check antenna connection
Antenna is damaged/
improperly set
No signal is transmitted
No image or sound Improper mode has been
selected on the TV
Choose proper mode on
the TV
Information that the
channel is coded /
unavailable
Coded / unavailable
channel
Choose another channel
Remote control does not
work
The device is turned off Turn on the device
The remote control is not
pointed at the device
Point the remote control
at the device no more than
8 meters from the remote
control sensor and within
30° horizontally and 30°
vertically of the front of the
unit
There are obstacles
between the remote
control and the device
Make sure there are no
obstacles between the
remote control and the
device
The batteries are
discharged
Replace the batteries with
the new ones
To Next Page
Loading...
Need help?
General