20
Owner’s manual
EN
BLUETOOTH MODE
1. When in clock display, press the button until „bt” is ashing on the display. It
means that the device is in the Bluetooth pairing mode.
2. Turn on Bluetooth on the external device.
3. Find and connect with this device (KM0817). Enter default password „0000” or
„1234” if necessary.
4. „bt” stops ashing when the connection is successful.
5. Press and hold the button to return to the clock display.
Note:
• Use the up/down buttons to switch between previous/next track.
This functionality may not be compatible with all music players. In such case, control
music playback from the connected external device.
SPECIFICATION
Main parameters
Radio: FM
FM radio frequency range: 87,5-108 MHz
LCD Display
Built-in antenna
Speakers
Drivers: 2x 2,25”
Output power: 2x 0,4 W
Impedance: 8 Ohm
THD: 0,8 %
Frequency response: 40 Hz – 15 kHz
S/N: 50 dB
Connectivity
Bluetooth: 2.1+EDR
Bluetooth range: up to 10 m
Bluetooth frequency bands: 2402 - 2480 MHz
Bluetooth transmit max. power: < 10 dBm
Functions
Clock
Alarm
Timer
Automatic dimming of the display
Display backlight
FM preset memory: 20
Possible to mount under a cabinet
Foldable stand
To Next Page
Loading...
Need help?
General