Krups 984 User Manual

Use caution when removing the “Perfect
Froth” from the steaming nozzle as it may
still be hot.
Use a damp cloth to clean the steam nozzle.
Use caution when cleaning or removing the
steaming nozzle as it may still be hot.
l After preparing espresso five times, the
drip tray and grid may need to be emptied
and cleaned
(see figures 18 and 19).
l The water reservoir, drip tray, baffle grid,
filter holder, and Perfect Froth attachment
should be washed and rinsed in warm,
soapy water on a regular basis.
l Before replacing the drip tray and grid,
make sure the baffle has been placed in
the drip tray properly (see figure 20).
l If the steam nozzle becomes clogged for
any reason, remove the screw that is
holding it in position (see figure 21).
Rinse it under the faucet with warm water. If
it is still clogged, take a sewing needle and
insert it into the tip of the steam nozzle to
free any milk particles.
l The warming tray can be removed and
wiped with a damp cloth for easy cleaning
(see figure 25).
00 NOT PLACE ANY LOOSE PfECES IN THE
DISHWASHER.
IMPORTANT
Clean the steam nozzle each time you have
immersed it in milk, otherwise the inside of
the nozzle becomes clogged with milk
particles. Allow the steam to escape into a
wet cloth for one or two seconds after
frothing milk. This will flush out any milk
residue.
A
CAUTION :
DO NOT TRY TO DISASSEMBLE THE MAIN
BODY OF THE MACHINE.
13

Krups 984 Specifications

General

Brand	Krups
Model	984
Category	Coffee Maker
Language	English