Use and maintenance / SERIE EA 80xx
KRUPS Espresseria Automatic
23
DEUTSCH
ENGLISH
FRANCAIS
NEDERLANDS
DANSK
SVENSKA
NORSK
SUOMI
ITALIANO
4.4 Using the auto-cappuccino accessory (optional)
The XS 6000 auto-cappuccino
accessory facilitates the preparation of a
cappuccino or caffe latte (white coffee)
with your Automatic Espresseria. The
accessory includes a brushed stainless
steel milk jug, a riser tube and a
connector tube, and a special nozzle.
Insert the stainless steel tube into the
rubber seal of the milk jug. It should reach
down almost to the bottom of the jug.
Set the special nozzle as follows for each
drink :
Turn the central section 180° so that the
drink symbol chosen is at the front.
Fit the special nozzle :
A) remove the steam nozzle (21) and
B) replace it with the special nozzle.
Fill the milk jug with cold milk (6 – 10°C).
Connect the special nozzle and the stain-
less steel tube using the connector tube.
Assembly and fitting of the auto-cappuccino accessory
Cappuccino Café Latte
Falcon Display Tu?v 0827932:Mise en page 1 10/03/08 13:51 Page 23
To Next Page
Loading...
Need help?
General
