EasyManua.ls Logo

Krups EA9010 - Service Manual

Krups EA9010
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DEFRNLITEN
WWW.KRUPS.COM
ESPRESSO AUTOMATIC
SERIES EA9000
www.krups.com
XXXXXXX - Réalisation : Espace Graphique
DE HOTLINE: DE: 0212 387 400 - AT: 01 866 70 299 00 - CH: 044 837 18 40
FR HOTLINE : B : 32 70 23 31 59 - F : 09 74 50 10 61 - CH : 044 837 18 40
NL HOTLINE: NL: 0318 58 24 24
IT SERVIZIO CONSUMATORI: IT: 199207701 - CH: 044 837 18 40
EN HOTLINE: UK: 0845 330 6460 - ROI: 01 677 4003
ESPRESSO AUTOMATIC SERIES EA9000
DEUTSCH

Questions and Answers

  • J
    Jeremy TaylorAug 20, 2025
    What to do if my Krups EA9010 does not switch on?
    • K
      Kelly ClarkAug 20, 2025
      First, check the fuses in your electrical installation. Then, ensure the mains plug is correctly inserted into the socket. If the socket is faulty, have it repaired. If these steps don't work, the appliance itself may be faulty and should be checked by a qualified technician.
  • J
    Joseph LeeAug 21, 2025
    How to fix slow coffee dispensing on my Krups EA9010?
    • K
      Kyle CruzAug 21, 2025
      The slow dispensing could be due to a clogged filter cartridge or the machine needing cleaning or descaling. Try starting a cleaning cycle on your machine. Also, remove or replace the filter cartridge.
  • S
    Scott WilliamsAug 25, 2025
    What to do if my Krups EA9010 displays a failure?
    • R
      Ryan HoodAug 25, 2025
      Turn off and unplug the machine, then remove the filter cartridge. Wait 20 seconds before restarting. If the failure continues, note the message on the screen and contact Krups customer service.
  • L
    Lori LewisAug 26, 2025
    Why does my Krups EA9010 Coffee Maker still show a water tank warning after filling it?
    • D
      David BoyerAug 26, 2025
      This issue may occur if the water tank is not fitted properly, the float at the bottom of the tank does not move freely, or the water tank is scaled up. Check and unblock the float if necessary. Reinstall the water tank properly until you feel some resistance. Rinse the water tank under running water and descale, if necessary.
  • J
    Joseph CooperAug 28, 2025
    Why does my Krups EA9010 Coffee Maker still say to empty the used coffee collector after I've emptied it?
    • S
      Stephanie CharlesAug 28, 2025
      This can happen if the used coffee collector is not fitted properly or if it was fitted back too quickly. Ensure you refit the used coffee collector correctly. Wait for at least 8 seconds before refitting the empty collector.
  • J
    Joseph CaseyAug 30, 2025
    Why does the Krups EA9010 Coffee Maker still indicate that the drip tray is full after emptying?
    • D
      Danny PughAug 30, 2025
      The metal contacts may be dirty. Try cleaning and wiping the metal contacts at the back of the drip tray.
  • A
    Austin WarnerSep 1, 2025
    What to do if my Krups EA9010 doesn't make coffee with pre-ground coffee?
    • H
      Hannah GonzalesSep 1, 2025
      This may be because you have poured too much pre-ground coffee, or the pre-ground coffee is too fine. Use a mixture for espresso coffee machines.
  • M
    Mark WeaverSep 3, 2025
    Why no steam comes out of the nozzle of my Krups EA9010 Coffee Maker?
    • C
      courtney88Sep 3, 2025
      The nozzle or the nozzle support may be blocked, or the water used may not be suitable for making steam. Wash the steam nozzle manually; clean and unblock each part. Check that the steam nozzle is screwed on properly. Empty the tank and remove the Claris cartridge temporarily. Fill the water tank with mineral water with high calcium content (>100 mg/l) and carry out steam cycles (5 to 10) consecutively into a recipient until you get a continuous jet of steam.
  • J
    Jason CollierSep 5, 2025
    Why is the coffee from my Krups EA9010 Coffee Maker too weak?
    • M
      Mrs. Tiffany HernandezSep 5, 2025
      The coffee might be too weak because there is not enough coffee in the coffee bean container or too much water is being used. Check that there is coffee in the container and that nothing is obstructing the sensor. Reduce the quantity of water in the coffee.
  • O
    Oscar CruzSep 6, 2025
    How to make my Krups EA9010 coffee hotter?
    • C
      Crystal WardSep 7, 2025
      The coffee may not be hot enough because the temperature setting is too low or the cup is cold. Check the coffee temperature in the 'Settings' menu and increase it. You can also programme your recipe using the 'Favourites' function by increasing the temperature. Warm the cup by rinsing it with hot water before starting the preparation.

Summary

Important Information on the Appliance and Instructions

Guide to the Symbols Used in the Instructions

Summarizes symbols and associated words used in the manual for warnings and notes.

Safety Instructions

Provides critical safety guidelines for proper and safe use of the appliance.

Overall View

First Use

Preparing Drinks

Preparing Coffee-Based Drinks with Coffee Beans

Step-by-step guide for making espresso and cappuccino using coffee beans.

Favourites Menu

Maintenance and Cleaning

8.1 Maintenance Menu

Accessing and using the maintenance functions for cleaning and upkeep.

Manual Cleaning of the Steam Nozzle

Step-by-step guide for manually cleaning the steam nozzle.

8.2 Automatic Cleaning Programmes

Guide to automatic cleaning cycles for the coffee circuit and steam nozzle.

Automatic Descaling Programme

Instructions for performing the automatic descaling process for the steam circuit.

Troubleshooting

Problem; Malfunction

Lists common issues, probable causes, and corrective actions for appliance malfunctions.

Krups EA9010 Specifications

General IconGeneral
Milk FrotherYes
Adjustable Coffee StrengthYes
Adjustable TemperatureYes
Pump Pressure15 bar
Automatic ProgramsYes
Power1450 watts
ColorBlack
MaterialStainless Steel
Coffee TypeCoffee
Water Tank Capacity1.7 L
Bean Hopper Capacity250 grams
GrinderYes, Integrated
Special FeaturesOne-Touch Cappuccino, Automatic Cleaning

Related product manuals