You can access the menu with the appliance’s other functions by the PROG button from the drinks selection screen. For all
settings, the rotating dial enables you to navigate through the menus and options and to conrm a choice, while the PROG button
enables you to cancel a selection and return to the drinks selection menu.
OTHER FUNCTIONS: PROG BUTTON
PROG
Maintenance
Enables you to access the various maintenance
options.
Settings
Enables you to access the various settings
options.
Product information Enables you to access product information.
Exit Takes you back to the previous menu.
SETTINGS
Language You can select the language of your choice from those offered.
Screen contrast You can adjust the screen contrast according to your preferences.
Date
You must set the date, particularly when you are using an anti-limescale
cartridge water lter.
Clock You can select to display a am/pm or 24-hour clock.
Auto-off
You can select the length of time after which your appliance will switch off
automatically, from 30 minutes to 4 hours, in 30 minute increments.
Auto-on
You can automatically start pre-heating the appliance at a pre-designated
time.
Automatic rinsing You can automatically start rinsing of the appliance when it is switched on.
Volume unit You can set the unit of measurement to be ml or oz.
Water hardness
You must set the hardness of your water between 0 and 4. See the section
“Measuring the water hardness”.
Coffee temperature
You can adjust the temperature of your espresso or coffee to one of three
levels.
Exit Takes you back to the previous menu.
MAINTENANCE
Rinsing Enables you to access the rinsing operations.
Coffee cleaning Enables you to access the cleaning operations.
Filter Enables you to access lter mode.
Exit Takes you back to the previous menu.
Cappuccino cleaning
Enables you to access the cappuccino system
cleaning operations.
MAINTENANCE
All of these options enable you to start the selected program. You should then follow the on-screen instructions.
SETTINGS
10
To Next Page
Loading...
