Filter the water using the
Claris-Aqua Filter System
cartridge to reduce
carbonate hardness by as
much as 75 %*
Chlorine – up to 85 %*
Lead – up to 90 %*
Copper – up to 95 %*
Aluminium – up to 67 %*
To get the best taste from your coffee and extend your appliance’s service life, we advise you to use the Claris - Aqua Filter
System cartridge sold as an accessory.
It comprises a scale-removing substance and activated carbon that reduces chlorine, impurities, lead, copper, pesticides,
etc. that are present in the water. Minerals and trace elements will then be preserved.
3
Before using the appliance for the first time or if you have noted a change in water hardness, it is advisable to adapt the
appliance to the water hardness. To determine the water hardness, use the measuring stick delivered with your appliance or
get in contact with your water authority.
BEFORE FIRST USE
After 1 minute the hardness measurement
will appear (moderately hard water).
Installing the cartridge in
the machine.
On first use, screw the
filter cartridge into the
bottom of the water tank.
The Claris cartridge needs to be replaced after about every 50 litres of water or every two months at least.
Use filtered water, but not bottled mineral water.
Mechanism to indicate
the month the cartridge
was fitted and when to
replace it (after 2 months
at most).
Degree of
hardness
0
very soft
1
soft
2
moderately hard
3
hard
4
extremely hard
°f
<5,4° >7,2° >12,6° >25,2° > 37,8°
°dH
<3° >4° >7° >14° > 21°
°TH
<3,75° >5° >8,75° >17,5° > 26,25°
1 sec.
012
3
4
F088
MEASURING WATER HARDNESS
CLARIS - AQUA FILTER SYSTEM F 088 CARTRIDGE (SOLD SEPARATELY)
*
indications provided by the manufacturer
Fill a glass with water
and immerse a stick
in it.
Before hardness
measurement.
Place a receptacle under
the steam nozzle. Run
300 ml of water by
pressing the rinse button
once for
more than
3 seconds
. You can
repeat this operation if
you wish.
To Next Page
Loading...
Need help?
General
