DEFRNLITEN
37
ENGLISH
Caution: Risk of scalding while unscrewing; the temperature of the nozzle can be high (> 50°C).
!
1
n You can access the “Maintenance” menu from the main menu
by pressing the “Maintenance” tab.
n To clean the nozzle and its container, you must follow the sequence
shown in the Maintenance tab.
n Failure to follow this sequence may damage the system.
n Press the “Manual cleaning of the nozzle” button on the touch screen.
n To quit the “Maintenance” menu, press the “Maintenance” tab.
2
n The nozzle comes out of the cleaning container.
n You can clean all of the parts of the machine located behind the coffee
nozzle.
3
n Remove the drip tray.
n Empty it and clean it.
n The nozzle moves forward and slightly downward.
4
n Unscrew the nozzle tip (10) with the steam nozzle (9).
n Do not remove the tip seals, as this may damage them and affect the
frothing performance.
5
n Clean the three holes on the nozzle tip using the pin supplied for this
purpose with the Welcome Pack. You must fully separate the two
parts to clean them properly.
n Do not wash the tip in the dishwasher.
n Caution: clean the tip properly.
n Press the “OK” button.
IFU_EN_KR_COFFEEMAKER_8020000082.qxp_Mise en page 1 22/05/2017 17:22 Page37
To Next Page
Loading...
