Need help?Do you have a question about the KS LEV DX and is the answer not in the manual?
Regular maintenance by a qualified technician is required; avoid disassembly due to pressure.
Ensure seatpost diameter matches frame seat tube for proper fit and function.
Seatpost must cover minimum insertion line to prevent damage and loss of control.
Tighten seat collar to 7 N-m; over-torquing affects proper function.
Place saddle rails between clamps; tighten head clamp bolts to specified torque (e.g., 8 N-m).
Mount remote lever on handlebar, tighten pinch bolt to 5 N-m (alloy) or 1 N-m (polycarbonate).
Route cable housing per frame guide; cut to length, feed inner wire through remote lever and housing.
General| Cable Routing | Internal |
|---|---|
| Material | Aluminum |
| Adjustability | Infinitely adjustable |
| Diameter | 30.9mm, 31.6mm |
| Travel | 100mm, 125mm, 150mm |
| Remote | Yes (optional) |
| Weight | 520g (varies with size) |
| Activation | Cable-actuated |
To Next Page
