KS LEV Integra - User Manual

HEIGHT ADJUSTABLE SEATPOST
USER MANUAL
This user manual covers the following models: LEV-Ci, LEV Integra, LEV-Si, e30-i, Crux-i,
eTen-i
2 1

Summary

Please Read This First

Attention and Warnings

Covers critical attention and warning notes regarding product usage and maintenance.

Before You Install the Seatpost

Seatpost Installation

Minimum Insertion Distance

Specifies the required insertion depth to prevent damage and ensure control.

Seat Collar Torque

Defines the maximum torque for the seat collar to ensure proper function.

Determining Cable and Housing Length

Cable and Housing Length Adjustment

Cable Routing

Cable Housing Cutting

Final Cable Housing Length Measurement

Instructs on marking and cutting the cable housing to the correct final length.

Cable Installation

Connecting the Inner Wire

Details installing the ferrule on the cable housing at the seat collar.

Feeding Inner Wire and Cable Slack

Cable Trimming and Locking Cable End

Connecting Inner Wire Components

Installing Seatpost on Bike

Final Seatpost Placement

Saddle Installation

Saddle Clamp Assembly and Torque

Adjusting Return Speed

Air Pressure Adjustment

Explains how to adjust return speed using air pressure and recommended pressures.

Safety and Maintenance

Pre-Ride Checks

Outlines essential checks before each ride for security and proper function.

Periodic Maintenance Schedule

Recommends routine maintenance intervals, cleaning, lubrication, and service procedures.

KS LEV Integra Specifications

General

Category	Dropper Seatpost
Actuation	Cable
Routing	Internal
Material	Aluminum
Remote	Sold Separately
Travel	100 mm, 125 mm, 150 mm
Diameter	27.2mm, 30.9mm, 31.6mm