Contents
3 of 36
KSB IE3-Motor
Contents
1 General.................................................................................................................................................... 6
1.1 Principles ...........................................................................................................................................................6
1.2 Target group.....................................................................................................................................................6
1.3 Other applicable documents............................................................................................................................6
1.4 Symbols .............................................................................................................................................................6
2 Safety...................................................................................................................................................... 7
2.1 Key to safety symbols/markings.......................................................................................................................7
2.2 General..............................................................................................................................................................7
2.3 Intended use .....................................................................................................................................................8
2.4 Personnel qualification and training...............................................................................................................8
2.5 Consequences and risks caused by non-compliance with this manual .........................................................8
2.6 Safety awareness ..............................................................................................................................................8
2.7 Safety information for the user/operator.......................................................................................................8
2.8 Safety information for maintenance, inspection and installation ................................................................8
2.9 Unauthorised modes of operation..................................................................................................................9
2.10 Electromagnetic compatibility.........................................................................................................................9
3 Transport/Temporary Storage/Disposal............................................................................................. 10
3.1 Checking the condition upon delivery..........................................................................................................10
3.2 Transport.........................................................................................................................................................10
3.3 Storage/preservation......................................................................................................................................10
3.4 Disposal/recycling ...........................................................................................................................................11
4 Description............................................................................................................................................ 12
4.1 General description ........................................................................................................................................12
4.2 Designation.....................................................................................................................................................12
4.3 Name plate......................................................................................................................................................13
4.4 Types of construction .....................................................................................................................................13
4.5 Mounting arrangements................................................................................................................................14
4.6 Noise characteristics .......................................................................................................................................14
4.7 Balancing.........................................................................................................................................................14
5 Installation at Site................................................................................................................................ 15
5.1 Checks to be carried out prior to installation...............................................................................................15
5.2 Installing the motor........................................................................................................................................16
5.3 Electrical connection ......................................................................................................................................17
5.3.1 Motor connection inside the terminal box ......................................................................................17
5.3.2 Checking the direction of rotation ...................................................................................................19
5.4 Tightening torques.........................................................................................................................................20
5.5 Installing and removing output components...............................................................................................21
6 Commissioning/Start-up/Shutdown................................................................................................... 22
6.1 Checking earth conductor connection..........................................................................................................22
6.2 Checking insulation resistance.......................................................................................................................22
6.3 Prerequisites for commissioning/start-up......................................................................................................22
6.4 Start-up ...........................................................................................................................................................23
6.5 Operating limits..............................................................................................................................................23
6.5.1 Voltages and frequencies ..................................................................................................................23
6.5.2 Maximum permissible speed .............................................................................................................23
6.5.3 Ambient temperature........................................................................................................................23
6.5.4 Altitude...............................................................................................................................................23
6.6 Shutdown........................................................................................................................................................23
6.7 Idle periods .....................................................................................................................................................24
6.8 Returning to service .......................................................................................................................................24
7 Servicing/Maintenance........................................................................................................................ 25
7.1 Safety regulations...........................................................................................................................................25
To Next Page
Loading...