KSB Megabloc User Manual

3 Transport/Temporary storage/Disposal


10of32Megabloc
3 Transport/Temporary storage/Disposal
3.1 Checking the condition upon delivery
1. On transfer of goods, check each packaging unit for damage.
2. In the event of in-transit damage, assess the exact damage, document it and notify KSB or
the supplying dealer (as applicable) and the insurer about the damage in writing
immediately.
3.2 Transport
DANGER
The pump (set) could slip out of the suspension arrangement
Danger to life from falling parts!
Always transport the pump (set) in the specified position.
Give due attention to the weight data and the centre of gravity.
Observe the applicable local health and safety regulations.
Use suitable, permitted lifting accessories, e.g. self-tightening lifting tongs.
Transport the pump set as shown below.
Fig. 1: Transporting the pump
3.3 Storage/preservation
If commissioning is to take place some time after delivery, we recommend that the following
measures be taken for pump (set) storage.
CAUTION
Damage during storage by humidity, dirt, or vermin
Corrosion/contamination of the pump (set)!
For outdoor storage cover the packed or unpacked pump (set) and accessories with
waterproof material
CAUTION
Wet, contaminated or damaged openings and connections
Leakage or damage to the pump set!
Only remove caps/covers from the openings of the pump set at the time of installation.

KSB Megabloc Specifications

General

Operating Pressure	Up to 16 bar
Impeller Type	Closed
Applications	Water supply, irrigation
Connection Type	Flanged
Speed	2900 rpm, 1450 rpm
Casing Material	Cast Iron